2024 John Deere 2230FH
Floating Hitch Field CultivatorWorking widths from 25ft, 6 in. to 69 ft, 6 in. (7.8 to 21.2 m)
Follows ground contour, stays level
Lattice-style frame design
TruSet™ Active improves tillage depth accuracy and makes adjustments for varying field conditions, such as tire sink in soft soils or residue build up on tires, with no need for operator input
Features may include:
Wide range of working widths available to match acreage and horsepower requirements- Three-section configuration
- Five-section configuration
- At 16-km/h (10-mph) working speeds, the 2230FH can cover up to 34 ha (84 acres) per hour, enabling producers to size their implement for their unique productivity and agronomic needs.
- Floating hitch frame on 2230FH
- Level-lift hitch frame on 2230LL
- The 2230FH Floating Hitch Field Cultivator offers superior ground-hugging capability with precise depth and pressure control across all types of terrain. The floating hitch frame design enables this field cultivator to work independently of the tractor and follow the contour of the ground so the implement remains level. The 2230FH commands consistent depth from front to back and from side to side.
- 229-mm (9-in.) sweeps – When weed management or weed removal is an important part of the tillage pass, a 229-mm (9-in.) sweep provides more of a cutting edge and can catch weeds that may bend around the wings of the 178-mm (7-in.) sweep.
- 178-mm (7-in.) sweeps – These sweeps provide enough wing width to maintain full-width tillage, but with less draft load than a 229-mm (9-in.) sweep. Less draft results in the shank maintaining a more consistent depth, especially at higher speeds, and less of a horsepower draw on the tractor. This will be most evident in harder, heavier soil types.
- 2024
- John Deere
- 2230FH
- Base
- Cultivator
- Horsepower per foot: 8 to 12 hp/ft (19.6 to 29.4 kW/m)
- Center frame tires on Walk-Over tandem wheels (bias-ply tire option available) / Wing frame tires on Walk-Over tandem wheels (radial tire option available)
- (4) IF280/70 R15 134D tires / (4) IF320/70 R15 144D tires / (6) 11L-15 FI LR D tires / (6) 12.5-L-15 FI LR D tires / (4) 11L-15D FI LR D tires
- 9-pin connector for warning lights
- Miles per hour: 6 to 10 mph (10 to 16 km/h)
- 2 SCVs
- 17,237 kPa (2500 psi)
- Floating hitch: 6x10 in. (15.2x25.4 cm) / T-hitch, cast-steel hitch link
- Rigid frame - 3-section: 15.58 ft (4.75 m) / 15.83 ft (4.82 m) / 15.92 ft (4.85 m) / 17.5 ft (5.33 m) | 5-section: 16 ft (4.88 m) / 16.08 ft (4.9 m) / 16.17 ft (4.93 m) / 16.25 ft (4.95 m) / 23.5 ft (7.16 m) | Standard spacing - Inches: 6 in. (8 to 12 hp/ft) | Fore-and-aft clearance On 2.7-m and 3.4-m (9-ft and 11-ft) center frames: 134 in. (3.4 m) / On 4.6-m (15-ft) center frames: 164 in. (4.2 m) | Underframe clearance: 24 in. (610 mm) | Split-the-middle: 6 in. (15.2 cm)
- Without rear harrow - 3-section: 11.25 ft (3.43 m) / 12.92 ft (3.94 m) / 13.83 ft (4.22 m) / 14.83 ft (4.52 m) / 16.08 ft (4.9 m) / 13.83 ft (4.22 m) | 5-section : 12.58 ft (3.83 m) / 13.58 ft (4.14 m) / 14.17 ft (4.32 m) / 15.25 ft (4.65 m) / 16.25 f (4.95 m) / 16.58 ft (5.05 m)
- 3-section: 25.5 ft (7.77 m) / 29.5 ft (8.99 m) / 31.5 ft (9.6 m) / 33.5 ft (10.21 m) / 35.5 ft (10.82 m) / 42.5 ft (12.95 m) | 5-section: 40.5 ft (12.34 m) / 44.5 ft (13.53 m) / 48.5 ft (14.78 m) / 52.5 ft (16 m) / 56.5 ft (17.22 m) / 60.5 ft (18.44 m) / 64.5 ft (19.66 m) / 69.5 ft (21.2 m)
- Rigid frame: 22.5 ft (6.86 m) | 3-section: 15.58 ft (4.75 m) / 15.83 ft (4.82 m) / 15.92 ft (4.85 m) / 17.5 ft (5.33 m) | 5-section: 16 ft (4.88 m) / 16.08 ft (4.9 m) / 16.17 ft (4.93 m) / 16.25 ft (4.95 m) / 23.5 ft (7.16 m)
- Up to: 5 in. (12.7 cm)
- Vertical weight: 1,500 lb (680.3 kg)
- Number of ranks: 3-section / 3.4-m (11-ft) center frame with 5-rank tube frame / 3.4-m (11-ft) center frame with 6-rank tube frame / 4.6-m (15-ft) center frame with 6-rank tube frame
- $109,591.13
- Abilene
- New
- 433012
- 2024
- John Deere
- 2230FH
- 1N02230FJN0795539
- Available