Specs

MANUFACTURER MODEL				John Deere 650
Fold
	Type			medium flex-fold, wide flex-fold
Working Widths
	Spacing option A			9-in.
		Option 1		23-ft. 9-in. (medium flex-fold)
		Option 2		26-ft. 8-in. (medium flex-fold)
		Option 3		29-ft. 6-in. (wide flex-fold)
		Option 4		32-ft. 4-in. (wide flex-fold)
		Option 5		---
		Option 6		---
		Option 7		---
		Option 8		---
		Option 9		---
		Option 10		---
		Option 11		---
		Option 12		---
		Option 13		---
	Spacing option B			11-in.
		Option 14		25-ft. 0-in. (medium flex-fold)
		Option 15		30-ft. 3-in. (wide flex-fold)
		Option 16		---
		Option 17		---
		Option 18		---
		Option 19		---
		Option 20		---
		Option 21		---
		Option 22		---
	Spacing option C			9-in. front/11-in. rear
		Option 23		25-ft. 0-in. (medium flex-fold)
		Option 24		26-ft. 9-in. (medium flex-fold)
		Option 25		30-ft. 3-in. (wide flex-fold)
		Option 26		32-ft. 0-in. (wide flex fold)
		Option 27		---
Transport Width
	Spacing option A			9-in.
		Option 1		17-ft. 8- in.
		Option 2		17-ft. 8- in.
		Option 3		17-ft. 8- in.
		Option 4		17-ft. 8- in.
		Option 5		---
		Opton 6		---
		Option 7		---
		Option 8		---
		Option 9		---
		Option 10		---
		Option 11		---
		Option 12		---
		Option 13		---
	Spacing option B			11-in.
		Option 14		17-ft. 8- in.
		Option 15		17-ft. 8- in.
		Option 16		---
		Option 17		---
		Option 18		---
		Option 19		---
		Option 20		---
		Option 21		---
		Option 22		---
	Spacing option C			9-in. front/11-in. rear
		Option 23		17-ft. 8- in.
		Option 24		17-ft. 8- in.
		Option 25		17-ft. 8- in.
		Option 26		17-ft. 8- in.
		Option 27		---
Transport Height
	Spacing option A			9-in.
		Option 1		11-ft. 0-in.
		Option 2		11-ft. 0-in.
		Option 3		13-ft. 8-in.
		Option 4		13-ft. 8-in.
		Option 5		---
		Option 6		---
		Option 7		---
		Option 8		---
		Option 9		---
		Option 10		---
		Option 11		---
		Option 12		---
		Option 13		---
	Spacing option B			11-in.
		Option 14		11-ft. 0-in.
		Option 15		13-ft. 8-in.
		Option 16		---
		Option 17		---
		Option 18		---
		Option 19		---
		Option 20		---
		Option 21		---
		Option 22		---
	Spacing option C			9-in. front/11-in. rear
		Option 23		11-ft. 0-in.
		Option 24		11-ft. 0-in.
		Option 25		13-ft. 8-in.
		Option 26		13-ft. 8-in.
		Option 27		---
Weight per Blade
	Spacing option A			---
		Option 1		---
		Option 2		---
		Option 3		---
		Option 4		---
		Option 5		---
		Option 6		---
		Option 7		---
		Option 8		---
		Option 9		---
		Option 10		---
		Option 11		---
		Option 12		---
		Option 13		---
	Spacing option B			---
		Option 14		---
		Option 15		---
		Option 16		---
		Option 17		---
		Option 18		---
		Option 19		---
		Option 20		---
		Option 21		---
		Option 22		---
	Spacing option C			---
		Option 23		---
		Option 24		---
		Option 25		---
		Option 26		---
		Option 27		---
Operating Speed
	Miles per hour			4-6 mph
Power Requirements
	Horsepower required			8-12 hp/ft.
Leveling Options
	Option 1			Crank fore-aft leveling
	Option 2			---
Depth Control
	Option 1			Single point
	Option 2			TouchSet
	Option 3			---
Hydraulic Requirements
	Standard			2 SCV's (lift and fold) at 2250 psi for optimum raise times
	Option 1			Additional control valve if equipped with hydraulic leveling control
	Option 2			Hydraulic wing control requires closed-center tractor hydraulic system
	Option 3			---
Electrical Requirements
	Standard			9-pin connector for warning lights
	Option 1			TouchSet depth control connector
	Option 2			---
Hitch
	Type			self-leveling
Wing Flex
	Up			12 degrees
	Down			12 degrees
Frame
	Tubing			7x7x5/16-in. mainframe; medium flex-fold: (inside) - 5x7x5/16-in., (outside) - 5x7x1/2-in.; wide flex-fold: (inside) - 7x7x5/16-in., (outside)- 7x7x3/8-in.
	Underframe clearance			---
Gang
	Angle			fixed
		Front		22 degrees
		Rear		20 degrees
	Tubing			---
		Front		Mainframe: 4x6x3/8-in.; Medium flex-fold wing: 4x6x5/16-in.; Wide flex-fold wing: 4x6x3/8-in.
		Rear		Mainframe: 4x6x5/16-in.; Medium flex-fold wing: 4x6x5/16-in.; Wide flex-fold wing: 4x6x5/16-in.
	Gang bolt			1.25-in. square
	Gang standard			Rigid nodular iron
	Welded spool diameter			5.5-in.
	Bearings			Dura-Flex
	Scraper			Combination
Finishing Blades
	Standard			Integral furrow filler
		Option 1		18-in. three-lobe finishing blades
		Option 2		20-in. solid spherical finishing blades
		Option 3		---
		Option 4		---
	Middle breaker			Cushioned - base equipment; 6-in smaller blade than base
Blades
	Spacing			9-in., 11-in., 9-in. front/11-in. rear
	Size			22in. x .256-in.
		Option 1		24in. x .256-in.
		Option 2		---
		Option 3		---
		Option 4		---
Wheels
	Mainframe wheels and tires			---
		Option 1		Medium flex-fold: 11L-15-in. 10 PR (4); Wide flex-fold: 11L-15-in. 12 PR (4)
		Option 2		---
		Option 3		---
		Option 4		---
	Wingframe wheels and tires			---
		Option 1		Medium flex-fold: 11L-15-in. 10 PR (2); Wide flex-fold: 11L-15-in. 6 PR (4)
		Option 2		---
		Option 3		---
		Option 4		---
	Stabilizer wheels			---
		Option 1		(folding models only) 5.90-15 4 PR Tires
		Option 2		---
Harrows
	Option 1			NA
		Spike/tine		---
		Rank spacing		---
		Spike/tine spacing		---
		Effective spacing		---
		Spike/tine dimensions		---
		Basket		---
		Basket Diameter		---
		Bar type		---
		Bar size		---
		Bearings		---
		Adjustments		---
	Option 2			---
		Spike/tine		---
		Rank spacing		---
		Spike/tine spacing		---
		Effective spacing		---
		Spike/tine dimensions		---
		Basket		---
		Basket diameter		---
		Bar type		---
		Bar size		---
		Bearings		---
		Adjustments		---
Rear Hitch
	Available			No
	Tubing size			---
	Telescoping			---
	Tongue weight rating			---
	GVW			---
	Wiring harness for transport lights			---
	Hydraulic hoses and couplers			---
Warranty
	Type			2-year warranty on DuraFlex bearings
Additional Features
	Option 1			Knock-out scrapers
	Option 2			---
	Option 3			---
	Option 4			---
	Option 5			---